recirculaton_inlet和recirculation_ioutet.docVIP

recirculation_inlet recirculation_ioutet Q: I have created a 2D geometry of a room (3m x 5m) and supply air duct is connected at the top. I would like to find out flow structure around the discharge area. 我创建了一个二维几何房间，送风管道连接顶部。我想找出绕流排放区的结构。 Computational domain : Part of incoming duct part of room (0.6m x 0.8m )near to outlet. 计算域：进口管道部分及靠近出口的房间部分。 Selected boundary condition as follows: 选定的边界条件如下：Inlet to duct进口管道: pressure inlet 10Pa with 2 % intensity Top horizontal ceiling顶部的水平天花板: wall left side wall : wall Right side bottom both with in same pressure condition. Right side