台式机常用接口定义图.docVIP

台式机常用接口定义汇总 目录 1、9针串口（不包括主板插座引脚） 2、25针串口 3、25针并口 4、15针VGA 显卡接口 5、游戏接口 6、PS/2 接口 7、键盘接口 8、USB接口 9、RJ45 接口(以太网10/100Base-T) 1、9针串口（不包括主板插座引脚） PC 机上的串行口是 9 针公插座，引脚定义为：Pin Name Dir Description 1 CD Carrier Detect 2 RXD Receive Data 3 TXD Transmit Data 4 DTR Data Terminal Ready 5 GND System Ground 6 DSR Data Set Ready 7 RTS Request to Send 8 CTS Clear to Send 9 RI Ring Indicator 2、25针串口 PC 机上的为25针公插引脚定义为：Pin Name Dir Description 1 GND Shield Ground 2 TXD Transmit Data 3 RXD Receive Data 4 RTS Request to Send 5 CTS Clear to Send 6 DSR Data Set Ready 7 GND System Ground 8 CD Carrier Detect 9 - - RESERVED 10 - - RESERVED 11 STF Select Transmit Channel 12 S.CD Secondary Carrier Detect 13 S.CTS Secondary Clear to Send 14 S.TXD Secondary Transmit Data 15 TCK Transmission Signal Element Timing 16 S.RXD Secondary Receive Data 17 RCK Receiver Signal Element Timing 18 LL Local Loop Control 19 S.RTS Secondary Request to Send 20 DTR Data Terminal Ready 21 RL Remote Loop Control 22 RI Ring Indicator 23 DSR Data Signal Rate Selector 24 XCK Transmit Signal Element Timing 25 TI Test Indicator  3、25针并口 PC机上的并行接口外观是 25 针母插座引脚定义为：Pin Name Dir Description 1 /STROBE Strobe 2 D0 Data Bit 0 3 D1 Data Bit 1 4 D2 Data Bit 2 5 D3 Data Bit 3 6 D4 Data Bit 4 7 D5 Data Bit 5 8 D6 Data Bit 6 9 D7 Data Bit 7 10 /ACK Acknowledge 11 BUSY Busy 12 PE Paper End 13 SEL Select 14 /AUTOFD Autofeed 15 /ERROR Error 16 /INIT Initialize 17 /SELIN Select In 18 GND Signal Ground 19 GND Signal Ground 20 GND Signal Ground 21 GND Signal Ground 22 GND Signal Ground 23 GND Signal Ground 24 GND Signal Ground 25 GND Signal Ground 4、15针VGA 显卡接口 VGA 是 Video Graphics Adapter 的缩写，信号类型为模拟类型，显示卡端的接口为 15 针母插座引脚定义为：Pin Name Dir Description 1 RED Red Video (75 ohm, 0.7 V p-p) 2 GREEN Green Video (75 ohm, 0.7 V p-p) 3 BLUE Blue Video (75 ohm, 0.7 V p-p) 4 ID2 Ground 5 GND Ground 6 RGND Red Ground