FA356性能規格及操作维修手册.docVIP

UNILAPPER FA 356 INSTRUCTION MANUAL Purpose of This Product This product is a new type of uni-lap machine. It is equipment for combing preparation. The purpose of this product is to improve straightness and parallelism of fibers and to deliver them as batt through further doubling and drawing of pre-doubling slivers, then to wind them as laps with a certain specification, weight and density for using on combing machines. Main Specifications FA356—300 FA356—270 2.1 Number of Feed Tables 2 2 2.2 Number of Doubling Slivers 24～32 20～28 2.3 Gauge between Feed Tables 2000 mm 2000 mm 2.4 Maximum Lap Diameter φ550 mm φ550 mm 2.5 Feed Sliver Weight 3.5～5.5 g/m 3.5～5.5 g/m 2.6 Delivery Batt Weight 50～70 g/m 45～63 g/m 2.7 Weight of Full Lap 20 kg 18 kg 2.8 Theoretical Output 375 kg/h 337.5 kg/h 2.9 Delivery Speed 80～120 m/min 80～120 m/min 2.10 Feed Mode Sliver guiding through high rack, positive feeding 2.11 Draft in Drafting Zone 1.3～2.27 1.3～2.27 2.12 Total Draft 1.298～2.55 1.298～2.55 2.13 Can Dimension ≤φ600 x 1200 mm (Diameter x Height) 2.14 Diameter of Sliver φ79.5 mm φ79.5 mm Guide Roller 2.15 Drafting Mode 3-over-4 curve drafting FA356—300 FA356—270 2.16 Diameter of Drafting Bottom Roller 1st Bottom Roller φ40 mm φ40 mm 2nd Bottom Roller φ25.6 mm φ25.6 mm 3rd 4th Bottom Rollers φ35 mm φ35 mm 2.17 Diameter of Top Roller φ40 mm; φ45 mm 2.18 Distance between Centers of Front and Back Bottom Rollers Maximum 118 mm 118 mm Minimum 101mm 101mm 2.19 Mode of Draft Loading Spring loading 2.20 Diameter of Pressing φ75 mm φ75 mm Roller on Delivery Table 2.21 Diameter of Calender Roller 1st Calender Roller φ154.8 mm 2nd Calender Roller φ148.2 mm 3rd Calender Roller φ151.8 mm 4th Calender Roller φ145.2 mm 2.22 Loading Mode of Calender Pneumatic loading Roller 2.23 Working Surface Form of