Riverbed實施部署Qos标记手册.doc

Riverbed实施部署Qos标记手册 Riverbed 公司Steelhead加速设备基本配置步骤 连接Console线 用随机所带Console线，从设备的console口，连接到计算机的串行口上。 启动终端仿真程序 启动Windows超级终端程序，或其他终端仿真程序。终端仿真程序应当进行如下设置： 速率：9600 数据位：8 停止位：1 奇偶位：无 流控：无 设备加电 用随机所带电源线，将设备连接到电源上。设备开始启动，在终端仿真程序中可以看到设备启动的过程。 设备登录 终端仿真程序屏幕上出现登录提示之后，就可以输入缺省的用户名/密码进行登录。缺省用户名是admin，缺省密码是password。如下所示，其中用户的输入用红色字体表示： Riverbed Steelhead amnesiac login: admin Password: password 开始配置 登录成功之后，会自动进入初始配置向导。逐个回答配置向导的问题来进行设备配置。如果接受配置向导提供的缺省值，只需直接输入回车。下面是配置向导的示例： Last login: Thu Jan 3 07:50:57 on ttyS0 Riverbed Steelhead configuration wizard. Do you want to auto-configure using a CMC? n Do you want to use the wizard for initial configuration? y Step 1: Hostname? [amnesiac] test-beijing - 给设备指定一个名称 Step 2: Use DHCP on primary interface? [yes] Step 3: Admin password? - 密码不要修改回车即可 Step 4: SMTP server? [] Step 5: Notification email address? Step 6: Set the primary interface speed? [auto] Step 7: Set the primary interface duplex? [auto] Step 8: Would you like to activate the in-path configuration? [no] y Step 9: In-Path IP address? 172.16.26.101 - 设备的IP地址 Step 10: In-Path Netmask? [0.0.0.0] 255.255.255.0 - 设备的掩码 Step 11: In-Path Default gateway? 172.16.26.1 - 设备的缺省网关 Step 12: Set the in-path:LAN interface speed? [auto] Step 13: Set the in-path:LAN interface duplex? [auto] Step 14: Set the in-path:WAN interface speed? [auto] Step 15: Set the in-path:WAN interface duplex? [auto] You have entered the following information: 1. Hostname: test-beijing 2. Use DHCP on primary interface: yes 3. Admin password: (unchanged) 4. SMTP server: 5. Notification email address: 6. Set the primary interface speed: auto 7. Set the primary interface duplex: auto 8. Would you like to activate the in-path configuration: yes 9. In-Path IP address: 172.16.26.101 10. In-Path Netmask: 255.255.255.0 11. In-Path Default gateway: 172.16.26.1 12. Set the in-path:LAN interface speed: auto 13. Set the in-path:LAN i