合同补录操作规范指南(投标方操作).docxVIP

Step1：使用招标方账户登录 JC.CSCEC.COM 【要求】登录账户具有合同管理的模块功能Step2：点击进入合同管理模块Step3：进入合同管理并点击合同补录，进入合同补录模块Step3：【合同录入的三个内容：①基本信息；②物资清单；③合同正文】Step4： 【基本信息填写规范】【例】：合同编号：按照公司合同编号原则进行填写； 合同总额：根据该合同涉及的材料总金额进行填写；注：单位为【万元】使用项目：选择对应的使用项目即可；选择付款方式：对应选择合同约定的付款方式；Step5：【物资清单的选择方式】可使用【选择物资】或【添加一行】两种方式，【选择物资】即按照物料编码库内物资进行选择，【添加一行】即当物料编码库内没有本次合同约定的对应物资时，根据招标物资自行录入名称，规格型号等内容。录入完清单后，注意保存 添加子物资点中行1再点击【添加一行】 即会出现子物资项，可以进行相应的填写在合同正文处将合同正文录入即可。near wire normal to. 6.2.2 cable cutting when cutting should be around cable and profile cutting with a cutting knife cutting a week, cutting depth for cable outer (insulation) stripped, cannot hurt the inner insulation layer and core. 6.2.3 before the first cable production, should be based on the amount of cable specifications, models to select the appropriate specifications of heat shrink tube, heat-shrinkable sleeve colornear wire normal to. 6.2.2 cable cutting when cutting should be around cable and profile cutting with a cutting knife cutting a week, cutting depth for cable outer (insulation) stripped, cannot hurt the inner insulation layer and core. 6.2.3 before the first cable production, should be based on the amount of cable specifications, models to select the appropriate specifications of heat shrink tube, heat-shrinkable sleeve colornear wire normal to. 6.2.2 cable cutting when cutting should be around cable and profile cutting with a cutting knife cutting a week, cutting depth for cable outer (insulation) stripped, cannot hurt the inner insulation layer and core. 6.2.3 before the first cable production, should be based on the amount of cable specifications, models to select the appropriate specifications of heat shrink tube, heat-shrinkable sleeve color