装饰装修工程施工合同(包工包料).docVIP

建筑装饰工程施工合同 第一部分 协议书 发包方（甲方）：承包方（乙方）：按照《中华人民共和国合同法》和《建筑安装工程承包合同条例》的规定，结合本工程具体情况，。指派为甲方驻工地代表，负责合同履行。对工程质量、进度进行监督检查，办理验收、变更、登记手续和其他事宜。参加甲方组织的施工图纸或作法说明的现场交底，拟定施工方案和进度计划，交甲方审定。）工程甲方负责采购供应的材料、设备，应为符合设计要求的合格产品，并应按时供应到现场。有关安全生产和防火的约定甲方提供的施工图纸或作法说明，应符合《中华人民共和国消防条例》和有关防火设计规范。 乙方在施工期间应严格遵守《建筑安装工程安全技术规程》、《建筑安装工人安全操作规程》、《中华人民共和国消防条例》和其他相关的法规、规范 乙方严格按甲方确认的图纸或作法说明违反有关安全操作规程、消防条例和防火设计规范，导致发生安全或火灾事故，。 由于乙方在施工生产过程中违反有关安全操作规程、消防条例，导致发生安全或火灾事故，乙方应承担由此引发的一切经济损失。 竣工后，乙方提出工程结算并将有关资料送交甲方。甲方自接到上述资料天内审查完毕，到期未提出异议，视为同意并在天内，结清尾款 建筑装饰装修工程施工合同书 第12页，总12页 near wire normal to. 6.2.2 cable cutting when cutting should be around cable and profile cutting with a cutting knife cutting a week, cutting depth for cable outer (insulation) stripped, cannot hurt the inner insulation layer and core. 6.2.3 before the first cable production, should be based on the amount of cable specifications, models to select the appropriate specifications of heat shrink tube, heat-shrinkable sleeve color near wire normal to. 6.2.2 cable cutting when cutting should be around cable and profile cutting with a cutting knife cutting a week, cutting depth for cable outer (insulation) stripped, cannot hurt the inner insulation layer and core. 6.2.3 before the first cable production, should be based on the amount of cable specifications, models to select the appropriate specifications of heat shrink tube, heat-shrinkable sleeve color 建筑装饰装修工程施工合同书 第- 1 -页，总12页 near wire normal to. 6.2.2 cable cutting when cutting should be around cable and profile cutting with a cutting knife cutting a week, cutting depth for cable outer (insulation) stripped, cannot hurt the inner insulation layer and core. 6.2.3 before the first cable production, should be based on the amount of cable specifications, models to select the appropriate specifications of heat shrink tube, heat-shrinkable sleeve color