本科毕业设计--电动门控制器.docVIP

南京林业大学 本科毕业设计（论文） 题 目： 电动门控制器 学 院： 专 业： 学 号： 学生姓名： 指导教师： 职 称： 摘要： 随着国民经济的发展，在越来越注重商业情报和安全的今天，对进出一些重要机关、科研实验室、档案馆、以及关系到国计民生的公用事业单位的控制中心、民航机场等场所的工作人员，给予进出授权控制。经济的增长有时引发犯罪的发生，对安全感的追求导致现代化楼宇对保安系统的要求也越来越高。通过对“”的研究和设计，精心撰写了论文。论文着重阐述了以单片机为主体，。 本设计主要应用作为控制核心，、、、相结合的系统 关键词：单片机 键盘扫描 无线收发 射频卡 Abstract： With the development of the national economy, today more and more people attach importance to commerce intelligence and its safety. In most important government organs, scientific research laboratory, archives establishment and being related to the nations economy and peoples livelihood utility unit control centre, airport and so on, they have to give their staff the right of entry-exit. The occurrence the economy increase is initiated sometimes committing a crime, the request leading to the security system of the modernizing building is higher and higher, Entrance guard system is to be analysis and design that arise at the historic moment, this project is aimed to the core modular-the electric door controller. Through the research and design to the thing that “the electric door controller” have written the controlled the systematic thesis of automatically-controlled door meticulously. This thesis it rely mainly on one-chip computer to explain emphatically, LCD modular, Keyboard Scanning modular, Wireless Transmit-Receive and smart card combined together. It use STC89C52 as core of controlling, LCD modular, Keyboard Scanning modular, Wireless Transmit-Receive, smart card and net communication combined together. Beside these, it also has the expand store function. Keywords：MCU Keyboard Scanning Wireless Transmit-Receive Smart Card摘要： 2 第一章 前言 6 1.1 门禁系统的概况 6 1.2门禁系统的发展 7 1.3本文研究的目的和意义 8 1.4 设计的要求与方案 8 第二章 总体设计分析 8 2.1组成框图 9 2.2主要功能模块的简介 10 2.2.1密码辨识 10 2.2.2遥控开门 10 2.2.3刷卡