大学毕业论文-学习型红外线控制器.docVIP

学习型红外线控制器毕业论文 摘 要 红外线遥控器是现在使用最广泛的一种通信和遥控方式。由于其结构简单、体积小、功耗低、功能强、成本低等特点，因此广泛应用于彩电、空调、CD/VCD、录像机、家用电器设备及工业控制。随着现在人们的生活中家电日益增加的需要。使用红外线遥控器也越来越频繁。因为各种红外线遥控编码的不同。使着各种红外线遥控器不能兼容。经常需要更换遥控器，这也给人们的生活带来不便。单片的机迅速发展，使这一问题得到了很好的改善。 在这里设计一种以AT89C51单片机为核心的学习型红外线控制器。通过测量红外一体化接收头输出信号。并原样的记录其输入脉冲宽度，保存在单片机中，使用单片机定时器中断产生40Khz载波信号，以软件代替硬件，节约了资源。该学习型遥控器能够成功的学习各种红外控制编码，并通过40Khz的载波发送学习到的记忆信号。实现了对各种各样的红外遥控的学习，从而实现了真正的自学习型遥控器。 关键词：红外线控制编码；AT89C51；学习型遥控器 Abstract Infrared remote control is the most widely used means of a communication and remote control, due to its simple structure, small size, low power consumption, strong function, low cost, and therefore widely used in color TV, air conditioning, CD/VCD, VCR household appliances and industrial control equipment. With people now living in the growing need for home appliances, use infrared remote control is also increasing frequent. Because of various different encoding format infrared remote control, making all kinds of infrared remote control can not be compatible. Often need to replace the remote control, which bings inconvenience to people is lives. SCM has been dwvoloped rapidly so that this problem has been well improved. In this design a kind of learning as the core AT89C51 infrared remote, first by measuing the output signal of Integrated IR receiver head, and stood to record the output pules width, and then stored in the stored in the SCM, Finally, single-chip timer interrupt to generate 40KHz carrier signal, the software instead of hardware, saving resources. The learning IR remote control can be successful in learning a variety of infrared remote control codes and send the signals have been stored by 40KHz carrier. Achieved on a variety of learning IR remote control, Therefore, to achieve true self-leaening remote control. Key Words：remote control codes；AT89C51；learning IR remote control 目 录 1 绪论 1 1.1 课题研究背景 1 1.2 红外技术的研究现状 1 1.3 课题研究内容 2 2 学习型红外线遥控器原理 3 2.1 红外线遥控简介 3 2.2 红外遥控原