曲线梁桥结构设计及内力计算设计范文.docVIP

五跨预应力混凝土曲线梁桥结构设计与内力计算 姓名： +++++++++ 学号： +++++++++ 班级： 桥梁 1202 指导老师：++++老师 五跨预应力混凝土曲线梁桥结构设计与内力计算 摘要 曲线梁桥又称弯梁桥，受力特点不同于其他形式，在外荷载作用下出现弯扭耦合，外边缘的挠度一般大于内边缘的挠度，对于设有抗扭支座的弯梁桥，外弧侧的支座反力大于内弧侧的支座反力，由于抗扭支座的存在而使结构为超静定结构，在结构设计与内力计算中比一般的梁桥复杂，因此，在处理这类问题时，可以借助有限元软件进行结构受力分析，如迈达斯，ansys,桥博，sap2000等。MIDAS/Civil是针对土木结构，特别是分析象预应力箱型桥梁、悬索桥、斜拉桥等特殊的桥梁结构形式，同时可以做非线性边界分析、水化热分析、材料非线性分析、静力弹塑性分析、动力弹塑性分析。为能够迅速、准确地完成类似结构的分析和设计的软件。 关键词：曲线梁桥 结构设计 内力分析 迈达斯 Abtract Curved girder is also called the curved girder bridge, the mechanical characteristics are different from other forms, the outer loads appear crankle coupling, outside the edge of the deflection generally greater than in the edge of the deflection, for curved girder bridge with torsion bearing, bearing reaction force is greater than the inner arc of the outer arc side side bearing reaction force, due to the existence of the torsional support and make the structure is statically indeterminate structure, the structural design and complex than the average in the calculation of internal force of bridge, therefore, in dealing with this kind of problem, can undertake structural stress analysis by finite element software, such as Midas, ansys, bridge, sap2000, etc.MIDAS/Civil is for Civil structures, especially the analysis of prestressed concrete box bridge, suspension bridge, cable-stayed bridge, such as special forms of bridge structure, and can do a nonlinear boundary, hydration heat, the material nonlinear analysis, the static elastoplastic analysis, the dynamic elastic-plastic analysis.To quickly and accurately finish analysis and design of software of similar structures. Keywords: curve beam bridge structure design, internal force analysis of Midas 目录 一：设计资料...............................................4 二：截面及防护栏设计及相关技术参数的确定...................5-6 三：五跨曲线梁建模.........................................7-10 四：结构内力计算...........................................10-26 3.1 计算结构自重（一期