最终实训论文1.docVIP

编号： （高频电路设计与制作） 实训论文说明书 题 目： 调频发射机 院 （系）： 信息与通信学院 专 业： 电子信息工程 学生姓名： 谭姣霞 学 号： 1001130807 指导教师： 胡机秀、李秀东、班立新、赵响 2012年1月 10日 摘 要 随着通信系统发展速度的越来越快，人们对电子产品的要求也越来越高。要制作一个应用性比较好的电子产品就离不开高频电路，大到超级计算机、小到袖珍计算器，很多电子设备都有高频电路。调频发射机作为一种简单通信工具，由于它不需要中转站和地面交换机站支持，就可以进行有效的移动通信，因此深受人们的欢迎。目前它广泛的用于生产、保安、野外工程等领域的小范围移动通信工程中。BA1404调频立体声发射集成电路设计一个发射频率在88～108MHZ外部信号输插座送到三极管的基极进行频率调制并Abstract Along with the communication system development speed faster, people to the requirements of the electronic products more and more is also high. To make a applied better electronic products cannot leave the high frequency circuit, the super computer, small to pocket calculator, a lot of electronic equipment has high frequency circuit. FM transmitter as an application of the high frequency circuit simple communication tool, because it does not need to station and the ground switch station support, can effectively mobile communications, so by the welcome of people. Now it is widely used in production, security, field engineering and other areas of small range of mobile communication engineering. This designs using BA1404 frequency modulation stereo launch integrated circuit design a transmitter which could launch in 88 ~ 108 MHZ frequency of FM..For this will just cover FM radio receive frequency,and by adjusting the inductance of the numerical, it can alter the frequency, avoid FM radio.The FM transmitter mainly from the basic amplifying circuit, carrier produce circuit, FM wave produces circuit,resonators, collect the external sounds of signal receiver MIC, etc. Through the microphone or external signal input jack will sound signal acquisition is introduced to FM transmitter, then to the transistors base on the frequency modulation and use of capacitance will send a signal to the antenna on the coupling emitted. Ke