薄板弯曲问题1.pptVIP

* * 12.1 Introduction and Assumptions 12 Bending of Thin Plates 12.2 Differential Equation for Bending of Thin Plate 12.3 Stress Resultants and Stress Couples 12.4 Boundary Conditions 12.5 A Simple Solution for Elliptical Plates 12.6 Navier’s Solution by Double Trigonometric Series 12.7 Levy’s Solution by Single Trigonometric Series 有关的概念及计算假定 （1）由两个平行平面和垂直于这两个平行面的柱面或棱柱面所围成的图形，称为板。两平行面称为板面，柱面称为板边，板面之间的垂直距离称为板厚，平分板厚的平面称为板的中面. （2）若板厚t??最小板边，称为薄板，否则称为厚板，根据板的形状，可分为矩形板，圆形板等 12.1 Introduction and Assumptions 一、薄板的特点： Thin Plates A plate is a body bounded by two closely spaced parallel planes and on