- 0
- 0
- 约4.58万字
- 约 61页
- 2016-12-05 发布于辽宁
- 举报
北方民族大学
学士学位论文
论文题目: AT89C51单片机USB接口驱动和应用程序的开发
院(部)名 称: 电信学院
学 生 姓 名: 杨闯
专 业: 测控技术与仪器 学 号:
指导教师姓名: 周春艳
论文提交时间: 2010年5月24日
论文答辩时间: 2010年5月29日
学位授予时间:
北方民族大学教务摘 要
通用串行总线USB是一种新兴的并逐渐取代其他接口标准的数据通信标准。USB,由于速度快,使用方便灵活,易于扩展,支持即插即用,成本低廉等一系列优点,得到了广泛的应用。
本论文以基于USB总线的数据采集系统的研制过程为主要内容,阐述了利用CH372与ATMEL的AT89C51等组成的一套数据采集系统的设计方案、开发方法和开发过程,并给出了具体实现方案。
论文首先简要介绍了USB总线的相关内容,然后介绍了数据采集系统的设计。数据采集系统的设计包括硬件设计、固件程序开发、驱动程序开发和应用程序开发四部分。在硬件设计部分,首先介绍了设计中所用的CH372的性能和特点,然后给出了具体硬件设计方案,并对设计中应该注意的问题进行了说明。驱动和应用程序主要完成USB设备的读写和即插即用功能,并提供一个友好的人机界面,对数据采集系统进行控制并显示采集后的数据。
本论文已完成了基于USB总线的数据采集系统的设计,用其实现了基本的数据采集功能。使用USB总线传输数据,为数据采集系统与计算机之间的通讯开辟了新的道路。
关键词:USB、驱动程序、应用程序、AT89C51、CH372
Abstract
Universal serial bus USB is one kind of emerging and replace other interface standards of data communication standards. USB, due to fast, convenient and flexible easy to expand, to support plug and play, low cost advantages, such as widely application.
The paper is mainly concerned with design process of data acquisition system that is based on USB bus. The design scheme, developing method and developing process of a suit of data acquisition system used with CH372 and ATMEL’s AT89C51 are expatiate. In addition, the paper also gives the material realization scheme.
At fist, the paper introduces the protocol of USB bus in brief, and then discusses the design of data acquisition system, which includes four parts, hardware design, firmware design, device driver and application program. In hardware part, the performance of CH372 is fistly described; then the hardware scheme are given in detail; the questions which should be paid attention to in design is explained. Drivers and applications of the main equipment and USB plug and play function, and provide a friendly human-machine interface, cont
您可能关注的文档
- 大学毕业论文---基于svpwm异步电动机.doc
- 大学毕业论文---基于struts2在线交易系统的设计与实现.doc
- 本科毕设论文---铁路机车设备维修问题的研究.doc
- 大学毕业论文---6mm高压锅炉管的开发.doc
- 大学毕业论文---12刀位星型伺服刀塔设计.doc
- 大学毕业论文---12万吨年乙醇水混合液的浮阀精馏塔设计.doc
- 大学毕业论文---35m预应力混凝土简支t梁桥设计.doc
- 大学毕业论文---66和10kv降压变电所的电气部分.doc
- 大学毕业论文---90后消费行为实证研究.doc
- 大学毕业论文---90后员工离职倾向研究.doc
- 大学毕业论文---c650卧式车床电气控制系统的plc改造.doc
- 大学毕业论文---c7620型卡盘多刀半自动车床的主轴箱设计说明书.doc
- 大学毕业论文---ca6140车床滤油器体的加工工艺及夹具设计.doc
- 大学毕业论文---ca6140卧式车床数控化改造设计说明书.doc
- 大学毕业论文---cdma2000系统微型直放站发信通道设计.doc
- 大学毕业论文---dks在中国市场本土化策略的研究.doc
- 大学毕业论文---dynaform车门冲压成形过程仿真与坯料设计.doc
- 大学毕业论文---dzw1025m锅炉设计.doc
- 大学毕业论文---eps电动助力转向设计.doc
- 大学毕业论文---erp在中国企业应用中的问题研究.doc
原创力文档

文档评论(0)