大学毕业论文---超声波加工技术研究.docVIP

襄 樊 学 院毕业16000Hz的工具头，通过悬浮液磨料对工件进行成型加工的一种方法。 其次，对超声波加工技术再机械加工中的应用做出研究，通过实例分别探讨其在研磨、洗削加工、深小孔加工中的应用，并与常规加工手段进行对比。 再者对超声波加工在清洗与探伤中的 应用做出基本的应用探究。 关键词：超声波加工，机械加工，其他应用 Application Research of Machining Technology Based on Ultrasonic Abstract Ultrasonic machining technology because its peculiar processing characteristics are widely used in all walks of life, especially in mechanical processing, such as grinding, deep hole processing scald, cleaning, etc. And again in textile, chemical, food, some quite also applies to the finished work of ordinary processing by ultrasonic machining can easily finish. This paper, the principle of the ultrasonic machining technology development and application of the above make preliminary research and exploration. First, the principle of ultrasonic machining and its mechanism, ultrasonic machining is to know to use vibrations frequency of more than 16,000 Hz, through suspension abrasive tool to head the forming of a kind of method. Secondly, of ultrasonic machining technology to the application of mechanical processing make research, through examples in this paper the grinding and wash cut processing, deep hole processing applications, and compared with the conventional processing methods. Moreover of ultrasonic machining in cleaning and testing the application of the application to make basic study. Key words: Ultrasonic machining, mechanical processing, other applications 目 录 第一章 绪论 - 1 - 1.1超声波的概念 - 1 - 1.2 超声波的产生 - 1 - 1.3超声波的两个参数及其特点 - 1 - 1.5 超声波加工技术的应用现状及发展趋势 - 2 - 1.6超声波加工技术的基本原理 - 4 - 1.6.1超声波加工机床简介 - 5 - 1.6.2 超声振动加工 - 5 - 1.6.3 超声复合加工 - 6 - 1.7研究的目的与意义 - 8 - 第二章 超声波精密研磨 - 9 - 2.1超声研磨的原理 - 9 - 2.2 超声波研磨的装置 - 11 - 第三章 超声波深小孔加工 - 13 - 3.1超声波振动钻的基本原理 - 13 - 3.2超声波加工的刀具 - 16 - 3.3刀具与机体的连接 - 17 - 3.4 超声波加工深小孔的实际应用—对玻璃小孔的钻削加工 - 18 - 3.4.1磨料选择 - 18 - 3.4.2工具的振幅与频率的选择 - 18 - 3.4.3加工压力的选择 - 18 - 3.4.4磨料悬浮液浓度的参数选择 - 18 - 3.4.5加工效果与缺陷 - 19 - 第四章 超声波铣削加工 - 20 - 4.1 超声波铣削加工的原理与特点 - 20 - 4.2 超声铣削机床 - 21 - 4.3超声波铣削加工中材料去除率模型 -