AMI AMI BIOS Post Codes.docVIP

NMI Disable NMI interrupt line to the CPU is disabled by setting bit 7 I?O port 70h (CMOS) Power On Delay Once the keyboard controller gets power, it sets the hard and soft reset bits. Check the keyboard controller or clock generator if a failure occurs Initialize Chipsets Check the BIOS, CLOCK and chipsets Reset Determination The BIOS reads the bits in the keyboard controller to see if a hard or soft reset is required (a soft reset will not test memory above 64K). Failure could be the BIOS or keyboard controller ROM BIOS Checksum The BIOS performs a checksum on itself and adds a preset