本科毕业论文---车型顶盖修边模具设计.docVIP

毕业设计 车型顶盖修边模具设计 目录 中文摘要 2 英文摘要 3 1 绪论 4 1.1 课题背景及意义 4 1.2 本课题及相关领域的国内外现状及发展 4 1.3 基于UG的覆盖件模具设计 5 2 顶盖修冲整形复合模设计 7 2.1 DL图信息的获取 7 2.2 DL图预处理过程 10 3 结构设计 12 3.1 模具镶块设计 12 3.2 压料芯(板)的设计 17 3.3上模本体设计 21 3.4下模本体设计 23 4 铸件结构 26 4.1 铸件结构设计方法 26 4.2 U形槽 29 4.3 周边结构 30 4.4 布置要求 30 5 设计验证 32 5.1 断面干涉验证 32 5.2 加工性验证 32 5.3 机加精度验证 32 5.4 生产性验证 32 致谢 33 参考文献 34 基于UG的某车型顶盖修边模具设计 摘要：在工业生活中，用各种压力机和装在压力机上的专用工具，通过压力把金属和非金属材料制出所需形状的零件或制品，这种专用工具统称为模具。目前，模具工业已经成为国民经济的重要基础工业。汽车工业是国民经济的支柱产业，汽车的更新换代主要取决于车身的开发周期。而车身开发的关键在于汽车覆盖件模具的设计与制造。汽车顶盖是车厢顶部的盖板，本课题是利用UG设计汽车顶盖修边模具。顶盖的冲压工艺、模具设计、制造工艺、调试以及使用与其它模具相比，都存在其独到之处。以冲压工艺而言，顶盖与其他冲压件相比具有材料薄，形状复杂，且多为立体曲面，结构尺寸大，表面质量高等特点，要获得一个合格的覆盖件，关键在于其工艺性是否合理。利用三维软件开发出参数化的模具结构、建立标准零件库对模具进行整体驱动，能大大减少重复性劳动，提高设计效率，缩短设计周期。从分析顶盖冲压件工艺性，可以看到，顶盖材料厚度0.8mm，属于薄板料成形，需要经过拉延、修边和整形三道工序。通过UG软件对汽车顶盖分析，经过DL图的预处理，从而设计出修边模模镶块。 关键词：汽车顶盖 修边模 修边模具设计 UG A model based on UG that trimming mold design Abstract：In the industrial life, with all sorts of press and put pressure on board in the specialized tools, through the pressure to put metal and nonmetal material for pointing out the shape of the parts or products, the special tools collectively referred to as the mould. At present, the mould industry has become the important basis of the industry of the national economy. The car industry is pillar industry of the national economy, the update mainly depends on the car body development cycles. And the development of key to body automobile covering die design and manufacture. Above that is the top of the car compartment cover plate, the subject is using UG design that car trimming mold. The cover of the stamping process, mold design and manufacturing process, debugging and use and other than die, there is the unique. To stamping process is concerned, and that other stamping compared with thin materials, shape complex, and more for three-dimensional surface, structure size and surface quality higher characteristic, to get a qualified covering, the key lies in its technology is r