formadehyde content should meet the design requirements.docVIP

formaldehyde content should meet the design requirements. 2, soft package engineering installation location, cell size and construction practices should comply with the design requirements. 3, soft package engineering keel, lining board, border or layering should be installed firmly, no warping, flat-fell seam should be straight. 4, single piece of soft package material should not have juncture, all round should be stretched tight. 5, soft package engineering surface should be smooth, clean, no bump and buckling; Decorative pattern and design should be clear, no color difference, the overall should be harmonious and beautiful. Six, varnish coating wooden border color, wood grain should be coordinated. 7, soft bag fabric electric lifted the lid opening size should be correct, set of cutting edge tidy, founder, no burrs. Engineering [36] ambry The material of 1, ambry production materials and specifications, combustion performance levels and moisture content of lumber, granite of radioactive and the man-made plank formaldehyde content should comply with the design requirements and the relevant provisions of the current national standard. 2, ambry installation of embedded parts or rear and built-in quantity, specification, location should meet the design requirements. 3, ambry the shape, size, location, production and fixed method should meet the design requirements. Installation should be strong. 4, cabinet fittings varieties and specifications should be similar to the original fittings or consistent, installation should be strong. 5, ambry drawer and cupboard door switch should be flexible, return true. 6, ambry surface should be smooth, clean, colour and lustre is consistent, can not have crack, warp and damage. 7, cabinets and cutting should be straight, flat-fell seam. Repair in accordance with the original cutting mouth seam. [37] curtain box of window, window sill and radiator cover project 1, curtain box of window, window sill plate cover and th