本科毕业论文---基于mcgs的氧化锌晶须生产过程系统设计说明书.docVIP

毕业设计说明书毕业论文 基于MCGS的氧化锌晶须生产过程系统设计 摘 要 氧化锌晶须生产过程是一个较为复杂的过程。由于长期依靠人工经验，现场操作缺乏科学的指导，使得通入氧化炉的气体参数不稳定，导致氧化锌晶须产品质量低。为此，迫切地需要设计氧化锌晶须的生产自动控制系统来提高其产品的质量，从而实现生产过程综合自动化。 本设计以氧化锌晶须生产过程为研究对象。在分析了氧化锌晶须生产过程中氧化炉用气参数与晶须质量的关系后，针对影响氧化炉用气的两个主要参数氧含量和流量，进行了配气控制系统的研究和设计。本文首先提出了该控制系统的结构框架，并总结了其功能特点；并根据给定的数学模型，采用前馈解耦控制算法和增量式PID算法，对氧化锌晶须生产过程中的氧含量和流量进行了控制。 应用软件采用MCGS组态软件和Siemens PLC S7-300系列的STEP 7软件编制，其中采用MCGS组态软件开发了该控制系统的监控软件，并将控制算法在MATLAB里进行了仿真验证；PID算法采用Siemens PLC S7-300系列的STEP 7软件编制。这实现了对氧化锌晶须生产自动控制系统的配气过程重要参数的监视、氧含量和流量的稳定控制和报警等功能。 关键词：氧化锌晶须；PID控制；MCGS；可编程控制器  The production of zinc oxide whisker system design based on MCGS Abstract The production process of zinc oxide whiskers are a more complex process.As a result of relying on artificial experience and lack of scientific guidance in the practical operation,and then the gas parameters accessed to the oxidation furnace are unstable.So,the product quality of zinc oxide whiskers is low.Therefore,developing automatic control system and using the advanced control technology to the zinc oxide whiskers production process have a very imperious to improve the product quality of the zinc oxide whiskers and realize integrated automation of the production process. Zinc oxide whiskers production process is considered as the research object in the paper.After analyzing the relationships between gas parameters accessed to the oxidation furnace and the whiskers quality, the gas distribution control system is researched and designed according to the request of the main factors?the oxygen content and the gas flux.At first,the paper propose a framework for the structure of the control system,and summarized its features;then,according to a given mathematical model，we control oxygen content and flow in the Zinc oxide whiskers production process,with using of feedforward decoupling control algorithm and incremental PID control algorithm. Applications use MCGS configuration software and Siemens PLC S7-300 series of the STEP 7 software devel