《AT89S825汽车组合仪表指针压装控制器的设计》.docVIP

本控制系统能达到的功能要求：（1）同时能压装四仪表指针；(2）每通道上限力值和下限力值可独立设定，独立显示；（3）既可对四通道统一进行启动压装和停止压装控制， 又可对每一通道进行单独控制。选择内部带EEPROM的AT89S8285作为人机子系统的核心，可以使参数在掉电时自动保存和上电时将参数自动取出作为默认值。SJA1000 是一个独立的CAN 控制器它在汽车和普通的工业应用上有先进的特征，它和PCA82C200 在硬件和软件都兼容；SJA1000 被设计为全面支持CAN 2.0B 协议。按键用于对四通道的上下限压力设置，具有输入0～9数字和设定四个功能键，因此设计了4X5的矩阵按键。液晶模块显示所输参数，具有四行显示功能。软件设计,由于C语言编程时软件相当简洁，尤其适用于较长的程序编写，更重要的是它具有良好的可移植性。因此优先选择C语言进行编程。关键词： AT89S825 SJA1000 矩阵按键 液晶模块毕业设计说明书（论文）中文摘要Title Automobile Instrument pointer press-fit controlleraman-machine subsystem AbstractThe control system to achieve the functional requirements: (1) also can be press-fit four-meter target, (2) The maximum power per channel values and lower power value can be set individually, independent display, (3) can activate the four-channel uniform pressure control equipment and stop the press-fit, but also a separate control for each channel. Select the internal EEPROM of AT89S8285 with the core as a man-machine subsystem, Parameters can automatically power down when the power is saved and will be automatically removed as the default value parameter. SJA1000 is a stand-alone CAN controller is in the automotive and general industrial applications with advanced features, SJA1000 and PCA82C200 compatible hardware and software. Button is used to set the minimum and maximum pressure of four-channel button, it can input 0 to 9 numbers, and set the four function keys, Therefore the design of the 4X5 matrix button. LCD module displays the input parameters, with four lines display. Software Design, as the C language programming software is terse , above all the procedures for the preparation of a longer, more importantly, it has good portability. Therefore, preferred C language programming.Keywords: AT89S8285 SJA1000 Matrix button LCD module毕业设计说明书（论文）外文摘要目录 TOC \o 1-3 \h \z \u HYPERLINK \l _Toc256000000 毕业设计说明书（论文）中文摘要觚汾注呸聒挞废吡藓粒汉胞警 PAGEREF _Toc256000000 \h II HYPERLINK \l _Toc256000001 前言激麈潜向杏瓴怒皙琐缸俅锉笊 PAGEREF _Toc256000001 \h 1 HYPERLINK \l