食品提升皮带机结构设计精选.docVIP

食品提升皮带机结构设计 摘 要 提升机是一种实现工程物料向上运输的机械，它是当代最为得力的输送设备之一，可广泛运用于矿山、码头、化工等各种场合，但是不同的工况下它对设备的要求是不同的。 本文以食品加工业为背景，设计提升食品的机械。本次设计的食品提升皮带机是一种小型的运输机械，其承载能力要求较小，相对于其他的带式输送机成本要求低，设计结构紧凑。本设计从整体结构出发，对整个装置中的驱动部分和传动部分进行了设计与计算。其中在驱动装置的设计与计算中，本设计选择电机—减速器的装置来作为驱动设备；而在传动部分的设计中，本设计选择了同步带轮与驱动装置相连，从而传递动力。本文另外还对装置中的改向滚筒、压辊及托辊部分进行了选择设计。 关键词：减速器；改向滚筒；压轮；托辊 THE DESIGN FOOD PROMOTION BELT FASTENER ABSTRACT The elevator is one kind of realization project material upward transportation machinery, it is one of contemporary most efficient conveyors, it widely utilizes in the mine, the wharf, the chemical industry and so on each kind of situation, but under the different operating mode it to the equipment request is different. This article take food processing industry as the background, the design promotion food machinery This design food promotion belt fastener is one kind of small transport machinery, its bearing capacity request is small, is opposite requests lowly in other belt conveyer cost, the design structure is compact This design embarks from the overall construction, has carried on the design and the computation to in the entire installment actuation part and the transmission part In which in the drive design and the computation, this design choice electrical machinery - reduction gear installment took actuates the equipment; But in the transmission part design, this design has chosen the synchronized band pulley and the drive is connected, thus transmission power This article other also to in installment changing to the drum, the drag roll and the supporting roller part has carried on the choice design. KEY WORDS ：Reduction gear; Changes to the drum; Pressure roller; Supporting roller 目　录 前　言 4 第1章 绪论 5 1.1概述 5 1.2运输机简介 5 1.3 研究内容 6 第2章 食品提升皮带机 7 2.1 简介 7 2.2 方案确定 8 2.3 设计方案综述 9 第3章 食品提升皮带机结构设计 10 3.1 简介 10 3.1.1 电动机的选择 10 3.1.2计算传动装置的总传动比和分配各级传动比 11 3.1.3传动装置的运动和动力参数 11 3.1.4 V带的设计 12 3.1.5 高速级齿轮设计 15 3.1.6 低速级齿轮的设计尺寸 19 3.1.7 轴的设计 19 3.1.8 轴的校核 23 3.1.9