本科毕业论文-半金属刹车片模压模设计和制造.docVIP

毕业设计（论文） 题 目 半金属刹车片模压模设计和制造 摘 要 本课题主要是对，并利用UG软件完成模具三维造型及二维工程图的设计。通过对的工艺优化及模具设计的流程、工艺重要参数选择及优化，确定合理的工艺方案，并对其工序进行相关的工艺尺寸计算，然后根据模的设计规范，设计出了合理的模具结构。 关键词：；； 模UG ABSTRACT This topic is mainly to semi-metallic brake pads molded mold design and development process, and completes the three-dimensional modeling and 2D drawing designing in UG.. By semi-metallic brake pads process and optimization of mold design process, technology selection and optimization of key parameters, determined a reasonable solution molding process , Calculated the process size which is related to