2013027-Anti Mold Chip Introduction-Fushang(DD)-EN.pptVIP

Fushang Anti-Mold Chip Strengths 1. Factory Environment Fushang provides free of charge factory environment evaluation services which specially focus on factories facilities and working environments. An official report will be provided after inspection to help factory find out the causes of mold cases. 2. Offer free seminar For any anti mold chips question, Fushang is able to offer a seminar to solve the questions about mold and also teach QC and representatives from factories how to use Fushang anti mold chips properly. Mold Resistant Report PFI Unique parts-Simulate practical factory condition 1. Use 30*15*11.5 empty shoe box (volume of approx. 5 litres) Put box into Incubator at 90% relative humidity, and 30°C, 24 hours before the start of the testing. 3. After 24 hours, inoculated with the test strain and anti mold chip, and incubated at 30°C and increased humidity (90% relative humidity) for 21 days. 4. During the period of test, the box lid needs to be opened on 3d, 7d, 14d, 21d to observe mold growth, this would cause the dilution of anti mold gas with outside air which is the biggest threat to the result, Fushang anti mold chips successfully passed up to 21days SGS Update Mold Resistance report On A Regular Basis To ensure stability of our products, we perform random inspections and sent to SGS every three months for quality control. Non of the other competitors are able to reach such a performance. Toxic Element Report DMF Lead Packing Material When place the cross tenon back into the hole, please notice: Acknowledgements：Partners Brands ★JIMLAR ★ZIGINY ★ROCKET DOG ★JCPENNY ★PEOPLE ★NORTHSTAR ★駿河 How To Use Fushang Anti Mold Chips(2) 1.Take out the anti mold chips from the purple bag and put in the operation box immediately. 埠蝶沾沉精恃绸优沟慕玻宪漂绞般浙渭罗碧焰西疲辞硷爬逾用胎滦狸愚Anti Mold Chip Introduction-Fushang(DD)-EAnti Mold Chip Introduction-Fushang(DD)-EN 2. Pull out the cross tenon.