PLC5编程软件FXGPWIN.ppt

PLC可编程控制器（Programmable Logic Controller） 讲义分为三部分PLC的基础知识三菱FX系列PLC西门子系列PLC 本PPT为第二部分，讲述三菱FX系列PLC，分六章： 本章内容 一、介绍 二、安装FXGP/WIN-E 三、基本操作 四、主窗口及功能 五、主菜单条及其功能 六、建立梯形图及指令程序 七、建立SFC程序 八、通过电话线进行远程维护 Operation while specifying trigger: Sampling will be performed while observing the specified tracing time until the trigger conditions are satisfied. When satisfied, sampling will be performed while observing the specified tracing time, and then completed when the number of tracing times equals the specified number (specified by Trace Count). Applicable devices: Contact : X, Y, M, S, T, C Coil : T,C (Y,M*1) Up to 10 devices Current Value : T, C, D, Z, V Up to 3 devices ? Index-modified devices in application instructions will be controlled as follows: - The current values of index-modified devices only will be displayed. - The current values of index-modified devices will not include the index modification result. - The current values of index registers (V and Z) will be displayed only if one index register (V or Z) is specified in the operand. ? The current values will be displayed using decimal numbers or hexadecimal numbers (H will be added to the top of the value). To switch the current value display style between decimal and hexadecimal numbers, click Monitor/Test and then Display Change of Monitor Data 关于注册元件的读和写（保存）在“元件监控入口”中注册的元件符号可以保存为注册监控文件，已有的俄注册监控文件也可以读入当前程序文件。要进行文件读写，选择元件监控窗口，进行以下操作。保存监控文件：文件→输出；读已有的监控文件：文件→输入 Program change conditions Hardware Model: FX2C series FX series (version 2.1 or above) FX0N series (version 1.10 or above) FX2N,FX2NC series Memory type: Internal RAM, optional RAM cassette, or optional EEPROM cassette (protect switch off) for FX2N,FX2NC series Internal RAM or optional RAM cassette for FX and FX2C series Internal EEPROM for FX0N series Programmable controller operation mode: Run or stop mode Program Items common to programmable controller FX0N, FX, FX2C, and FX2N,FX2NC series: 1 ) When you change a ladder diagram, you can change only one