英文版SJT 11364-2014 电子电气产品有害物质限制使用标识要求_en.docx

ICS 31. 020L10 Record No. SJElectronic Industry Standard of the People’s Republic of China SJ/T 11364－2014 Replacing SJ/T 11364－2006Marking for the restriction of the use of hazardous substances in electronic and electrical productsIssued on July 9, 2014 Implemented on January 01, 2015 Issued by Ministry of Industry and Information Technology of the People’s Republic of China SJ/T 11364－2014PrefaceThis Standard is drafted in accordance with the rules in GB/T1.1-2009This Standard will replace and nullify SJ/T 11364—2006, Marking Requirements for Control of Pollution Caused by Electronic Information Products.The major changes of this Standard are as follows in comparison with SJ/T 11364—2006a) In Name and Scope, “electronic information products” in SJ/T 11364-2006 is changed to “electronic and electrical products”, “pollution control” to “restricted use of hazardous substances”；b)Adding explanation of reference use for logistics processes (see Section 1);c)Deleting normative reference documents GB 18455, Package Recycling Markings (See SJ/T 11364-2006, Section 2);d)Adding terms and definitions of “electronic and electrical products”, “hazardous substance” and “logistics”(see 3.1, 3.2 and 3.7) and deleting terms and definitions concerning electronic information product, “toxic and hazardous substance”, “producer”, “importer” and “packaging material” in SJ/T 11364—2006 (see SVT 11364-2006 3.1,3.2, 3.4, 3.5 and 3.7);e)Adding marking for electronic and electrical products with display function with digital format marking;f)Deleting packing material name marking requirement (see SJ/T 11364—2006 Section 9).Please note that some contents of this document may involve patents. The release organization of this document shall not be responsible for identifying these patents.This Standard was proposed by the Electronic Information Product Pollution Control Standards Work Group of the Ministry of Industry and Information Technology.This Standard is under the jurisdiction of