紧固常用中英照.docVIP

一.孔别 紧固件常用英文对照 1.割沟Slotted 2.十字穴 Phillips 3.米字穴 Pozidriv(cross recess) 4.十字割沟 Slotted phillips 5.四角孔Square 6.十字方孔 Square phillips 7.六角孔hexagon 8.方孔割沟Square slotted 9.梅花穴Six-lobe 10.三角孔Triangle 11.Y型槽Y-type 12.斜Y槽Tri-wing 13.五等角5-Point 二,电镀 1.电镀锌Zinc plated 2.白皮Plain finished 3.五彩Yellow zinc plated 4.镀镍Nickel plated 5.热浸锌Hot dip galvanized 6.黑锌Black zinc plated 7.镀黑Black finished 8.染黑Black oxide 9.(黑)磷酸盐(black)Phosphated 10.黄铜 Brass 11.镀青蓝Unichrome plated 12.古铜A.C Brontze 13.青古铜Antique brass 14.机械镀锌Mechanical galvanized 15.绿锌Green zinc plated 16.电锌腊Zinc platedwaxed 17.达克锈Dacrotizing plated 18.久美特Geomet 19.耐落Nylok陆锈宝Rupst 20.翡丽雅特 ViridAct 21.美加力Magni 三.常用名称 1.螺丝类 中文名称 方头螺栓 沉头方劲螺栓 沉头沉带榫螺栓 (大)半圆头方颈螺栓 六角头铰制孔用螺栓 英文名称 Square head bolts Flat countersunk square neck bolts Flate countersunk nib bolts Cup head square neck (with large head)bolt Hexagon fit bolts 对应标准 GB/T 8-88 C级 GB/T 10-88 GB/T 11-88 GB/T 14/15-88 GB/T 27-88 A和B级 六角头螺杆带铰制孔用螺栓(细杆) Hexagon fit bolts with split pin hole on shank(Reduced shank) GB/T 28-88 A和B级 十字槽凹穴六角头螺栓 六角头头部带孔螺栓 T型槽用螺栓 加强半圆头方颈螺栓 活节螺栓 地角螺栓 头角头螺栓 六角头法兰面螺栓 外六角花法兰面螺栓 Cross recessed hexagon bolts with indentation Hexagon bolts with wire holes on head Bolt for T-slot Strengthened cap head square neck bolts Eye bolts Eyelet bolts Hexagon head bolts Hexagon flange bolts Steel hexalobular head bolt with small flange GB/T 29.2-88 A和B级 GB/T 32.1-88 A和B级 GB/T 35.1-88 B级 GB/T 794.1-93 GB/T798-88 GB/T799-88 GB/T5780-2000 C级 GB/T5789-86 B级 DIN 34801-99 PDF created with pdfFactory Pro trial version HYPERLINK 2.螺柱类 中文名称  英文名称 紧固件常用英文对照  对应标准 双头螺柱bm=1d 等长双头螺柱 B级 螺杆 3.螺钉类 中文名称 开槽圆柱头螺钉 开槽沉头螺钉 开槽半沉头螺钉 内六角圆柱头螺钉 内六角平圆头螺钉 内六角沉头螺钉 十字槽盘头螺钉 十字槽半沉头螺钉 十字槽圆柱头螺钉 滚花高头螺钉 滚花平头螺钉 内六角花形盘头螺钉 内六角圆柱头轴肩螺钉 4.自攻螺钉 中文名称 十字槽盘头盘自攻螺钉 十字槽沉头盘自攻螺钉 十字槽盘头盘自攻锁紧螺钉 十字槽凹穴六角头自攻螺钉 Double end studs-bm=1d Double end studs(clamping type)-product grade A Thread rods 英文名称 Slotted cheese hea