无线通信第三部分学习课件.pptVIP

* * Attenuation Factor Model Where nSF represents the exponent value for the “same floor” measurement. The path loss on a different floor can be predicted by adding an appropriate value of FAF * * Signal Penetration into buildings Measurements showed that penetration loss decreases with increasing frequency. Specifically, penetration attenuation values of 16.4dB, 11.6dB,and 7.6dB were measured on the ground floor of a building at frequencies of 441MHz, 896.5MHz, and 1400Mhz, respectly. Results showed that building penetration loss decreased at a rate of 1.9dB per floor from the ground level u