ch07_应变硬化与退火_E_2导论.ppt

* Figure 7.13 Shot peen the shaft 轴（表面）喷丸强化 * Section 7.5 Characteristics of Cold Working冷加工的特性 ?2003 Brooks/Cole, a division of Thomson Learning, Inc. Thomson Learning? is a trademark used herein under license. Figure 7.14 A comparison of strengthening copper by (a) cold working and (b) alloying with zinc. Note that cold working produces greater strengthening, yet has little effect on electrical conductivity.比较铜的强化效果(a)通过冷加工强化(b)与锌形成合金强化。注意冷加工导致更高的强度，但是对电导率的影响小。 屈服强度 * ?2003 Brooks/Cole, a division of Thomson Learning, Inc. Thomson Learning? is a trademark used herein under license. Figur