《无损探伤机人机接口与通信模块设计word格式》.doc

Tianjin University of Technology and Education 毕 业 设 计专 业： 电气技术教育 班级学号： 电气 学生姓名： 指导教师： 邴志刚 副教授二〇七年 六 月天津工程师范学院本科生毕业设计 无损探伤机人机接口与通信模块设计 esign of HMI and Communication Module for nondestructive Inspection Equipment专业班级：电气0202 学生姓名：丁振卫 指导教师：邴志刚 副教授 系 别：自动化工程系 2007 年 6 月 摘 要 军事、科研、工业、农业和医疗等许多领域得到了广泛的应用。 AT89S52单片机为核心，键盘输入，数码管显示工作状态。实现远距离串行通信，无损探伤机操作操作人员的人身安全 关键字无损探伤；；；单片机 ABSTRACT With development of electric and electronic technology, MCU technology and detection technique, non-destructive inspection technology of flaw detection as a kind of science and technology in China, has already developed rapidly and comparatively ripe, which is widely used in lots of fields such as military, scientific research, industry, agriculture and medical treatment. In chapter 1, several kinds of commonsense methods of non-destructive inspection are mainly introduced, and the basic principle of inspection by using of X ray and the groundwork done in this design are roughly narrated. In chapter 2, systematic structural design and systematic workflow taking AT89S52 as the core are recommended especially. In chapter 3, the circuit of relevant hardware and software are designed, and the design of function module of HMI is achieved, including keyboard as the display system, and working voltage and working state through LED number are displayed. In chapter 4, the design of the function module of systematic communication is mainly recommended, with specifically selecting RS-485 communication protocol to realize remote serial communication, thus non-destructive inspection machine is operated the function at a distance, which may makes sure the personal security. Key words：nondestructive inspection；；communication； 目 录 1 绪论 1 1.1无损探伤机的设计背景 1 1.2本文所做的主要工作 2 2 系统的整体设计 3 2.1系统的总体结构设计 3 2.2系统的工作流程设计 3 3 人机接口部分电路的设计与实现 5 3.1硬件部分电路的设计与实现 5 3.1.1 AD采集电路 5 3.1.2键盘和数码管的驱动电路 5 3.1.3指示灯控制电路 6 3.1.4单片机看门狗电路 7 3.1.5面板的设计 8 3.2软件部分电路的设计 8 3.2.1单片机的选用 8 3.2.2单片机的工作流程 9 3.2.3键盘和