《螺旋输送机传动装置的设计及三维建模 毕业设计》.doc

X X X X 本科毕业设计 题 目 的设计及三维建模 院 系 机械学院 专 业 XXXXXXXXXXXXXXXXXXXXX 姓 名 XXXXXX 学 号 XXXXXX 学习年限 201X年9月至201X年6月 指导教师 XXXXX 职称 副教授 申请学位 工学学士学位 2015年X 月 XX 日 螺旋输送机传动装置的设计 学生姓名：XXX 指导教师：XXX 摘 要： 在本次设计中，我设计了螺旋输送机机的传动装置，先进行了传动方案的选取，通过选定的传动方案进行了一系列计算和设计。电动机、联轴器、键和轴承的选择主要通过查表并结合与其他零件的配合要求选择，然后进行校核计算。在齿轮的设计中详细介绍了齿轮材料的选择及许用应力的确定，按齿根弯曲疲劳强度和齿面弯曲疲劳强度设计计算确定齿轮参数及主要尺寸,并且对齿轮进行了校核。其后对轴进行了轴的设计，确定了各阶梯轴的尺寸，对轴、轴承、键、联轴器等进行校核,并画出受力图、弯矩图、转矩图。最后对减速器的外形进行了设计。应用Solidworks 软件对传动装置进行3D建模，，为传动系统的结构设计提供了有价值的参数依据。 关键词：螺旋输送机 传动装置 斜齿轮 solidworks ABSTRACT: In this design, I designed the plate mill of transmission device ,first it has carried on the transmission scheme selection, through the selected transmission scheme and design of a series of transmission parts. The choice of motor, coupling, keys and bearing mainly through the look-up table and combine with other parts of coordination and asked subjects to choose, and then the motion parameters and dynamic parameters is calculated. In gear was introduced in detail in the design of the gear material selection and determination of allowable stress, calculate and determine the gear parameters is designed according to the tooth root bending fatigue strength and main dimensions. Followed by designing of shaft, and determine the size of the ladder shaft, the shaft, bearing, key and coupling for checking. Finally it has carried on the design to the shape of the reducer. Application of Solidworks software modeling technology, realizing the three-dimensional modelling and main reducer parts modeling, to complete the 3 d modeling of the machine, for the structure of transmission system design provides valuable parameter basis. KEYWORDS：plate mill transmission device bevel gear solidworks  目 录 1 引言 1 1.1 螺旋输送机的课题研究背景 4 1.2.螺旋输送机的课题研究意义 4 2 设计任务书 2 2.1 设计任务 2 2.2