《韩王煤矿通风系统设计本科毕业设计说明书》.doc

韩王矿矿井通风系统设计 摘要：韩王矿位于焦作煤田凤凰岭断层和九里山断层所构成的地垒构造部位，西端受上述两断层交汇切割而封闭，向东渐变宽阔并与演马庄矿相接，区内为一向南倾斜的断块状构造。地层走向自西向东由近东西向渐变为北东向，倾向南南东，倾角5～15°，平均煤厚6.01m，构造复杂程度属中等构造。设计矿井为高瓦斯矿井，涌水量较大，根据实际的地质资料情况进行矿井初步设计，决定采用斜井二水平开拓，设计液压支架综采，倾斜长臂分层开采采煤法，用全部跨落法处理采空区。并对矿井运输、矿井提升、矿井排水和矿井通风等各个生产系统的设备选型计算，以及对矿井安全技术提出措施和环境保护，完成整个矿井的初步设计。 关键词：斜井开拓 倾斜长壁 通风设计 Han wang mines ventilation design Abstract:Han wang coalfield ore is located in phoenix valley and Jiu Li Shan constitute structure parts in Jiao Zuo.West end intersection influenced by the above-mentioned two faults cutting and closed,east end intersection become wide slowly and connect Ma Zhuang gradient and mineral,the tilt of the south for broken block structure. Formation to from the west to the east by nearly east-west gradient,Slope south east to south, dip Angle 5 to 15 °, average coal thick is 6.01 m, structural complexity is medium structure. Design for mine gas larger yield, According to the actual situation of geological data mine preliminary design, decided to adopt double level inclined develop, design movable support machine adopt, tilting the long arm stratified coal mining method, with all the cross fall method and treatment of goof. And the mine mine, transportation, improve drainage and mine ventilation, and other production equipment selection calculation of the system, and put forward measures for mine safety technology and environmental protection, complete the whole mine the preliminary design. Keywords:Slope pioneering tilt long wall ventilation design 目 录 1 引 言 1 编制毕业设计的依据 1 1.2 主要技术原则 1 1.3 对设计的简要评价： 1 2 井田自然概况及地质特征 2 2.1 井田自然概况 2 .1.1 井田位置及交通 2 .1.2 自然地理 2 .1.3 地震基本烈度 3 .2 地质特征 3 .2.1 矿区范围内的地层情况 3 .2.2 井田范围内和附近的主要地质构造 5 .2.3 煤层赋存状况及可采煤层特征 5 .2.4 煤质特征 6 .2.5 井田内水文地质情况 6 .2.6 开采煤层顶底板岩石工程地质特征 7 .2.7 瓦斯、煤尘、煤层自燃倾向性、地温 8 11 3.1 井田境界 11 .1.1 井田周边状况 11 .1.2 井田境界确定的依据 11 .1.3 井田未来发展情况 12 .2 井田储量 12 .2.1 井田储量的计算 12 .2.2 保安煤柱 13 .2.3 储量计算方法 13 .2.4 储量计算的评价 15 .3 矿井工作制度、生产能力、服务年限 15 .3.1 矿井工作制度 15 .3.2 矿井生产能力的确定 15 .3.3 矿井服