基于云服务器的变电站启动调试全景监控系统.docVIP

基于云服务器的变电站启动调试全景监控系统 马勇1，张照辉1，陈光1，谢天喜1，龚引颖2(1.国网江苏省电力公司电力科学研究院,南京211103； 2.武汉华瑞通电力设备有限公司，武汉430000) 摘要：3G/4G通信网络在云服务器上部署隧道通信程序，实时获取多个变电站启动调试时电磁暂态波形数据、设备状态以及任务进度，达到启动调试全景监控的目的。通过GPS/BD同步授时，实现暂态波形数据的同步，实现多站数据关联。测试表明：该系统能够实时、直观获取各站点暂态波形、设备状态以及试验进度等，实现启动调试全景监控。 ：云服务器; 启动调试; 时钟同步；全景监控中图分类号：TM862 文献标识码：B 文章编号：1001-1390（2016）-0000-00 A panoramic monitoring system for substation startup and debugging based on cloud server Ma Yong1, Zhang Zhaohui1 Chen Guang1, Xie Tianxi1, Gong Yinying2 (1. Jiangsu Power Grid Electric Power Research Institute, Nanjing 210000, China. 2. Wuhan HuaRuiTong Electric Power Equipment Co., Ltd, Wuhan 430000, China) Abstract: A kind of substation commissioning panoramic surveillance system was realized through the 3G/4G communication network and tunnel communication program was deployed in the cloud server to obtain real-time measuring waveform data, equipment state and the state of the task of multiple substations to achieve the purpose of panoramic debugging and monitoring. Also each substation measuring equipments receive the second synchronous signals of GPS/BD satellite to get time synchronized measurement waveform data, thus to get the time association of each substation measuring data. The test results show that the system has real-time and intuitive access to the site measured waveform, equipment status and the progress of the experiment of each substation. It realizes the panoramic monitoring of start debugging of multi substations. Keywords: cloud server, start debugging, clock synchronization, panoramic monitor 0　引 言 _____________________________ 要实现暂态波形数据的关联，首先需要实现各测量设备的时钟同步；同时各测试点彼此距离较远，如何实现多变电站试验数据的全景监测是系统研究的关键。本文根据当前变电站启动调试的现状，结合工程实践，采用GPS/BD同步对时方案实现多站分布式测量设备的时钟同步[1-3]；结合云服务高动态、高可靠性、以用户为导向的特点和3G/4G网络覆盖范围广，网络带宽大以及3G/4G终端技术的应用[4]，将多变电站测录数据传输到监控中心，实现输变电工程启动调试的全景监控。 1　系统整体设计方案 变电站启动调试全景监控系统分为子站、中心主站、云服务器和全景调试监控中心四大部分。 子站将现场信号分布式采集、无线传输，并将数据和控制命令发送到云服务器。 中心主站的功能是提供单个变电站无线网络覆盖和接入点，同时进行射频信号转发。 云服务器为子站和全景