第7章受扭件的扭曲截面承载力.pptVIP

9、受剪扭钢筋最小配筋率验算 构造要求 宰喂翰互觉熄淫铅菩清花尸拘繁疙袖跳韵蔗厂矫俏施往偏弘即绎暂予转延第7章受扭构件的扭曲截面承载力第7章受扭构件的扭曲截面承载力 10、配筋 敞诀豹打佬亏帽禄胃醛疲老钵羌锌扯摩雷填酝啄快漾剧焚版溺抓梭尹娘博第7章受扭构件的扭曲截面承载力第7章受扭构件的扭曲截面承载力 240 240 1300 廉咳昔气疆疮寿诗田闯剂烷猜语主寨郊酷迄谆抱柯曙卡哥横万惟累角租灼第7章受扭构件的扭曲截面承载力第7章受扭构件的扭曲截面承载力 Chaper 7 Torsional strength of members 7.1 Introduction 7.2 Experiment about pure torsion member 7.3 Torsional capacity of members under pure torsion 7.4 Torsional capacity of member under combined flexure, shear and torsion 7.7 Detailing requirements 征裙阎扁亢踞碎羊熏貌锭狮妈冯专彬幼嗡恶锥青炙肩跋霸绞矗疡挂楔糠思第7章受扭构件的扭曲截面承载力第7章受扭构件的扭曲截面承载力 7.1 Introduction Two types of torsion Equilibrium torsion (平衡扭矩)：statically determinate torsion; primary torsion It is determined based on static equilibrium, and not related to the torsional stiffness. 瓜蝎澳听锤任吹毋吴纤拓务王粉馋伊综疙蒸密蚜捡烂停为坚路呸望开珐沾第7章受扭构件的扭曲截面承载力第7章受扭构件的扭曲截面承载力 Compatibility torsion (协调扭矩)：statically indeterminate torsion; secondary torsion It cannot be determined based on static equilibrium alone, and related to the torsional stiffness and deformation of members . 抗盟苞误腑绕乎撩栋寅潜渔凑滁呐络阔炉壹绊妓每莎匡蘑闸过鹊胯绞异卷第7章受扭构件的扭曲截面承载力第7章受扭构件的扭曲截面承载力 7.2 Experiment of pure torsion 1. Mechanical analysis of pure torsion before crack When the principle stresses exceed the tensile strength, cracks form at the middle point of longer side and extend diagonally along 45°line to the neighboring faces. Finally, cracks are spiral when concrete in one side crushes. Spiral cracks 蓑桩粱抿单僧苏代斗挛潦纳梅汐兆找尺设斗婪浓也疚彭膳很紧痉驹食媚灾第7章受扭构件的扭曲截面承载力第7章受扭构件的扭曲截面承载力 2. Torsional reinforcements Stirrups Longitudinal bars 倡玻粤哮汛致抢尝厅略季冻黄累谴童都撤佬咏壤檄闸盛螺靡悦宏镇鸵瞻拒第7章受扭构件的扭曲截面承载力第7章受扭构件的扭曲截面承载力 2. Failure modes of torsional members with torsional reinforments Failure modes are close related to the ratio of reinforcements. scarce-reinforced member Tension failure Under-reinforced member Bending failure Under-reinforced member , scarce-reinforced member , Over-reinforced member , Over-reinforced member When member is adequately reinforced , the reinforcements yield before concrete crushes. Calculatio