牛震07005100毕业论文.docVIP

单位代码 6130 学　　号 070605100 分 类 号 密 级 毕业论文 CAD/CAM集成的双刀车削数控编程系统的开发 院（系）名称 工学院机械系 专业名称 机械设计与制造专业 学生姓名 牛震 指导教师 李鹏 2010年月日NC程序生成和轨迹模拟等任务，从而提高数控编程效率和质量。本文主要研究内容如下： 1．综述国内外数控技术现状及发展趋势。论述了数控编程技术和方法，指出了双刀车削数控编程系统的一些关键技术。 2．介绍了双刀车削数控自动编程系统的开发平台及开发工具：0bjectARX、VC．NET。 3。设计了双刀车削数控自动编程系统的功能及技术方案，包括菜单的定制、工艺交互、前置处理、后置处理和刀具运动轨迹模拟。 4．在CAD通用平台上实现人机交互工艺规划，以工步为单元输入工艺数据，并用链表存储这些信息。 5．论述刀具运动轨迹模拟的目的和实现轨迹模拟时涉及的关键技术，以及轨迹模拟在AutoCAD平台上的效果。 关键词：双刀车削加工；数控编程；轨迹模拟；VC．NET；ObjectARX Development on CAD／CAM Integrated Twin—cutterNC Turning Programming System Abstract With increase speed of train, the higher quality and machining accuracy of train wheels are required. The rough wheels are hot rolled steel, whose dimensions are scattered in a large range. The wheels are produced by order with middle or small batch. The cycle of supply is short．Given the situation mentioned aboveNC programming is requested to be fast，efficient，and accurate．Manual programming can not satisfy the demands of production．With no doubtmodem programming technology is the first choice. In recent years, automatic programming technology of single-curer NC lathes has been researched widely in the world. However, the technology of twin-cutter NC lathes has barely been researched．Twin-cutter NCning programming system is helpful to improve programming efficiency and quality according to enterprise’s requirements．In this system，computer-aided technology is utilized in creation of the models，process planning，calculation of curer location data(CLDATA)generation of NC code and simulation of the machining, etc. The main contents are as follows： 1．An overview on current situation of NC technology is represented．NC programming technology and method are presented．Further more，some key technologies of twin-cutter NC turning programming system are released。 2． platforms and tools(ObjectARX and VC．NET)to develop twincutter NC turning programming system are introduced． 3