AMFX_anual_V240(E).docVIP

2001/10/09 Auto Mount Feedback for X-series (Program-AMFX_10*.pgm, Manual-Ver2.40E) YAMAHA MOTOR CO.,LTD. IM CAMPANY ENG.TEAM. MOUNTER Gr. Contents Overview 4 Execution Conditions 5 Mounting Adjustment Procedure 6 1.Camera Adjustment 6 2.R Axis Accuracy 7 3.Warm Up 7 4.Adjustment Steps for the Various Rec. Devices 7 Procedures for executing the various adjustment steps 9 1.Preliminary Preparation 10 Selecting the Recognition Method 10 Specifying Using Recognition Camera 10 Head Settings For QFP Nozzles 10 Confirmation about Cord-MACS and Multi-MACS 11 2.Select/Confirm PCB Data 11 3.Warm Up 11 4.Mount 11 5.Confirm Mark Database 12 6.AMF Program 12 7.Select PCB Data (Camera No.) 12 8.Component Recognition 12 9.Check The Result 13 10.Check The Corrected Values 14 11.Save The Measured Data 14 12.Save The Adjustments Log 14 13.Restoring The Various Settings 14 AMF PCB Data 15 1.PCB Information 15 2.Mount Information 15 3.Component Information 15 4.Mark Information 17 5.Block Repeat Information 17 6.Local fiducial information 17 7.Local bad mark information 17 Adjusted Parameter 18 1.Moving camera position 18 2.Multi camera position 18 3.Single camera position 18 4.Head offset 18 5.Zigzag parameter 18 6.Paralell parameter 18 7.Rotation parameter 18 Items to be Adjusted on Various Models 19 1.YV100X-F,[TOPAZ-X] 19 2.YV100X-S 20 3.YV88X-F 21 4.YV88X-SF,[EMERALD-X] 22 5.HSDX 23 6.YV100XT-F,[OPAL-X], YV100XTL-F 24 7.YV100XT-S, YV100XTL-S 25 8.YV180X 26 9.i-CUBE,4HEADS 27 10.i-CUBE,SSF+SSF HEADs, SSF+SF HEADs, SF+SF HEADs 28 Executing the AMF Program 29 1.Booting the AMF Program 29 2.Selecting the PCB Name and Recognition Device 29 3.Beginning the Measurement 30 4.Ending the Measurement 30 5.Selecting the Display 30 [1/Yes, I want to FEEDBACK.] 30 [2/No, I do NOT want to FEEDBACK.] 31 [3/Show Details of Results.] 31 [4/Show all of measured Data.] 31 [5/Show feedback value.] 32 6.Exiting the AMF Program 32 How to use “AMF CHART”