pumpbearing泵轴承题库.ppt

Abrasive Wear of Polymers - Rotary Drum Abrasion Test 60-grit coarse sand paper surface ThorPlas Dry-Run Capability 75mm (3”) carbon steel shaft / 0.5 HP motor Velocity: 1800 rpm (7.2m/s or 1410FPM) Pressure: 0.034MPa (5 Psi) Dry-run capability exceeds soft elastomer and rubber bearings, many rigid polymers, and metals Powertech Wear Testing - Comparison to Other Bearings Powertech Testing -  ThorPlas Bearing After Test No measurable wear, or damage after dry, edge-loading, and wet tests Wet Test Bearing Fitting Installation ThorPlas bearings are normally installed with an interf