Tracepro stary light.pptVIP

Complete the Telescope Importance Sampling Define importance sampling for the primary and secondary mirrors. Determine the optimal location of the importance sampling target for the primary: Set the half angle of the beam to zero and trace a y fan of rays using the Grid Raytrace dialog box. Exclude the secondary mirror and support struts from the ray-trace using the Apply Properties dialog box, Raytrace Flag tab. Using the Grid Raytrace dialog box, Beam Setup tab, select Beam orientation method: Euler angles (degrees). Enter (-0.25, 0, 0) for the Direction angles. The point where these rays co