学士学位论文-一种基于dynamips的gui路由器仿真系统的设计与应用.docVIP

JIU JIANG UNIVERSITY 毕 业 论 文 题 目 一种基于Dynamips的GUI路 由器仿真系统的设计与应用 英文题目 Design and Application of a GUI Router Simulation System Based on Dynamips 院 系 信息科学与技术学院 专 业 计算机科学与技术 姓 名 孙允磊 班级学号 A081151 指导教师 尧时茂 二○一二年五月 摘 在由于实验室环境下思科网络设备用PC机模拟真实思科网络设备并在其上进行网络实验有十分重要的现实意义。Dynamips内核组成，其中图形化界面的设计通过微软MFC框架实现。系统自动加载Dynamips内核，能够模拟思科产品系列中型号的路由器和交换机产生与真实设备完全一样运行环境的。在实验使用Dynamips的虚拟实验平台SecureCRT相结合，将产生良实验效果关键词：，Abstract In the traditional network engineering experiments which, because of the limited laboratory environment, Cisco network equipment and to experiment with and subject to restrictions on the location. Therefore, a PC simulation of the real Cisco networking equipment and network experiments on a very important practical significance. The paper describes the design of a Cisco router simulation system, to realize its significance, the system is mainly composed of front-end graphical interface and Dynamips core graphical user interface designed by Microsoft MFC framework. Load Dynamips core, able to simulate most of the models in the Cisco product line of routers and switches, and almost exactly the same with the real network equipment operating environment and the experimental effect. In the experiment, the use Dynamips virtual experiment platform automatically build the topology file, and SecureCRT combination will produce good experimental results provide a platform for CCNA certification, but also a vast network of technology enthusiasts. First a brief overview of Cisco simulator status and operating system environment and demand analysis. Detailed description of the system development process in Microsoft MFC framework, main contents include the main interface of system design, the topology file to build the module design, device boards to select and connect the modular design the device to start the module design, and system resource optimization des