6 - GDT Best-Fit training level 2.pptxVIP

GDT ActivitiesGDT 步骤Assembly geometry convergence总装尺寸趋同Best - Fit procedureBEST FIT 过程Training level 2June 13th 2013 - SHENZHEN GDT - M. BOUCHERChapter 1 What is the Best-Fit activity and why we must do it ?BEST FIT 是什么 ，为什么 要做？Assembly geometry convergenceChapter 1 : What is the Best-Fit activity and why we must do it ?The Best-Fit procedure is a process which defines all the activities to ensure the function aesthetics, sealing and handling closures on the marketable vehicles (EL2).BEST-FIT定义了保证商品车上功能美学，密封，开闭件的操作等所有活动的过程The Best-Fit procedure doesn’t replace convergence to the nominal during the industrialisation phase.BESTfit 并不是替代工业化阶段向名义值的趋同（向名义值指标达成）?The Best-Fit procedure is complementary to the others geometrical convergence’s processes like “Screw body” or “PSA Fer 167 activities”…BEST FIT是对其它尺寸趋同活动（像SCREW BODY PSA167)的补充The Best-Fit procedure must be done with a validated study and a repeatable processBEST-FIT 必须在已经确认的，稳定的过程下进行Before 2008, functionalities were converged very late during the project and some vehicles (EL2) were marketed with defects.在2008项目以前，功能性的趋同在项目阶段非常晚，有的车型带着缺陷在上市Before, when we made a tryout in EL, it was necessary to send the stamping tools in a specialist machinist. That was very expensive (money time).以前，当我们在EL阶段调试时，冲压模具仍需要进行特殊的机加工，这是非常昂贵和浪费时间。Assembly geometry convergenceChapter 1 : What is the Best-Fit activity and why we must do it ?后门与后翼子板匹配面Functions to guarantee :需保证的功能Aesthetic : ≤ 0,5mm on the GF美观： ≤ 0,5mm 间隙面差Sealing : ≤ 0,5mm on the sealing gap密封性： ≤ 0,5mm 密封间隙Door closing : ≤ 0,5mm on the sealing gap车门关闭性： ≤ 0,5mm 密封间隙说明：PSA在尺寸调试阶段要求所有的尺寸偏差均值在1/3的公差范围内IT/3=0,5IT/3=0,5Result with the parts at the target :实际达到的值Aesthetic : 1mmSealing : 0,9mmDoor closing : 0,9mmIT/3=0,4IT/3=0,5We must do the Best-Fit adjustment to solve the defectAssembly geometry convergenceChapter 2 What do we do during the Best-Fit activity ?在BESTFIT中我们做什么？ Assembly geometry convergenceChapter 2 : What do we do during the Best-Fit activity ? Best-Fi