(喷油线开线程序.docVIP

WORK INSTRUCTION 作 业 指 导 书 DOC. No. / 文件编号: FMPTI-006 REV./ 版本号: 01 PRODUCT/ 产品: Painting part TITLE / 标题: Painting Line Set Up Procedure 喷油线开线程序 PAGE/页数 1 OF 12 REVISION HISTORY / 版本记录 REVISION 版本 CHANGE DESCRIPTION 修改内容 ISSUER 发布者 RELEASE DATE 发行日期 01 New release to replace the doc FMASI-018 Karen Gong 2007-1-31 REMARK 备注 Release hardcopy to Painting APPROVAL DEPARTMENT NAME TITLE 部门 名字 职位 Painting Michael Li Manager QA Jack Feng Manager QA Linda Xiang System Engineer DMP-001-F2 . 01 PURPOSE (目的) This procedure describes the painting set up process and the methods used to monitor and control the operation of the painting process. 此程序用以规范和监控喷涂线开线程序. SCOPE (范围) Flextronics Enclosures B10 High Volume Painting Line (ABB) ABB喷涂线 Flextronics Plastic B6 High Speed Painting Line (Iwata) 盐田喷涂线 DEFININTION（定义） FAIFirst Article Inspection首件检查 REFERENCE(参考文件) Master parameter record/parameter setting 标准喷涂参数记录表 Paint Mixing OI 调油作业指导书 TDS of paint 油漆涂装工艺书 RESPONSIBILITY（职责） Paining supervisor arrange own production schedule according to production schedule from planner , need to decide which line runs which part, and which technician and leader follow up. 喷涂主管根据生产计划安排喷涂生产, 决定喷涂线的使用,组长和技术员分工. Production technician is responsible to prepare the FAI sample and submit to QA. 喷涂技术员负责首件制作, 并送交喷涂QC检查. QA is responsible to prepare the thickness and colour chip for production spray. 质量部负责对制作厚度和色板样件交付生产部喷涂. QA is responsible to check and approve the first painting sample. Make sure the quality of the products measure up to the quality requirement. 质量部负责检查和通过喷涂首件,并确保首件达到质量要求. QA is responsible to prepare the FAI report. 质量部负责制作首件