镇污水处理厂的毕业设计.docVIP

摘 要 设计进水水质氮含量较高，因此在设计处理工艺是还需要考虑脱氮除磷技术，由于污水厂规模小，污水日变化量较大，因此，在设计过程中选择适应该情况的氧化沟工艺。在氧化沟前添加厌氧池，以提高除磷效果。实现出水水质达标且稳定的目的 设计结果表明：污水处理厂处理后的出水达到《城镇污水处理厂污染物排放标准》（GB18918-2002）中的一级B标准。 关键词：城市污水；Carrousel 2000氧化沟工艺；脱氮除磷；工艺设计 Abstract The main task of this design is the sewage treatment plant in town design size 85000m3 / d, with the Carrousel 2000 oxidation ditch treatment process. The high level of nitrogen and phosphorus, The smaller quality of wasterwater and the changable of capacity,these are some factors that must beconsidered as choosing the wasterwater treatment press. Nitrogen and phosphorus must be removed together with suspended solid and organics in the design. So the carrousel oxidatian ditch process is employed. In addition,the aeration tank was import in order to enhance the removel of phosphorus. to get a better and steady effluent quality. Thus it is extensively adaptability, totally suitable for reality originally purpose. Sewage treatment process for the Carrousel 2000 oxidation ditch process, sludge treatment process for the sludge thickening and dewatering process. The sewage treatment plant process: from the pumping station to the grit chamber, into the oxidation ditch, secondary sedimentation tank, the final effluent; sludge process: from the secondary sedimentation tank sludge discharged from the first into the concentration tank, for pollution soil enrichment, and then into the storage basins, was concentrated in the sludge and then sent to the belt filter press, and further dehydrated, transported to the landfill. The design of the existing urban wastewater treatment process has significant advantages compared to: (1) has a unique hydraulic flow characteristics, are conducive to active sludge biological cohesion (2) without first settling tank, organic suspended solids in aerobic oxidation ditch to achieve a stable level. (3) BOD load is low, so that oxidation ditch has on water temperature, water quality, water movement has strong