液晶高压板去保护的方法.docVIP

液晶高压板去保护的方法 通常会碰到一些显示器只有一根灯管坏和保护电路异常引起的黑屏故障，为做到快修我们通常会去把芯片的保护电路去掉。以下是在维修中碰到和网上查到的一些芯片的去保护方法，希望能对大家有些帮助OZ9938去掉保护电路方法：1.把3脚直接对地短路，　2.把6脚直接对地短路3.把7脚接地电阻取下不用? ?MP1038EY 用导线11脚连接2脚? ?TL5001??5??脚对地短路．? ?TL1451??15??对地短路? ?TL5451? ?15??对地短路? ?BA9741??15? ?对地短路? ?BA9743??15??对地短路? ?MB3775? ?15??对地短路? ?AT1741? ?15??对地短路? ?AT1380??2? ?对地短路? ?KA7500? ? 1和16??对地短路? ?TL494? ? 1和16??对地短路，如不行短路4脚? ?FA3629? ?15和16? ? 将外接电容短路, ? ?FA3630? ? 7和10? ?对地短路? ?OZ960 OZ962? ? 2? ?对地短路? ?OZ965? ?4? ?对地短路6 ? ?OZ9RR??8? ?对地短路9 ? ?BIT3101? ?2和15??吸空引脚? ?BIT3102??5? ?吸空引脚? ?BIT3105??4? ?吸空引脚? ?BIT3106? ?4和27??吸空引脚? ?BIT3107? ?4? ? 吸空引脚? ?BIT3193? ?15??吸空引脚3吸空? ?AAT1100??8? ?对地短路? ?AAT1107??15??对地短路采用“PWM控制IC＋全桥结构驱动电路”的高压板中，驱动电路采用全桥结构形式，PWM控制IC主要采用OZ960、OZ970、OZ9910、BlT3l05、BlT3106、MPS1010B、MP1026、MP1029、MP1038、BD9883、BD9884等，下面结合实际高压板电路进行分析。1.由OZ960组成的高压板电路　　OZ960是凹凸公司(02Micro)生产的液晶显示器背光灯高压逆变控制电路，可将输入的不稳定直流电压变换成近似正弦波的高电压，来驱动背光灯管。OZ960具有如下特点：高效率，零电压切换；支持较宽的输入电压范围；恒定的工作频率；具有较宽的调光范围；具有软启动功能；内置开灯启动保护和过电压保护等。OZ960引脚功能见表。BD9884集成电去.掉保护功短接17-18脚对地电容 ?? ?? ?? ?? ? staff and workers representativesThe representatives of the staff and workers from the unit or away from retirement, on behalf of automatically disqualified, on behalf of the delegation to the original vacancy shall be in accordance with the provisions of the election.Replace the fourteenth representatives of the staff and workersThere are the representatives of the employees, who have the right to change the unit:1, due to illegal law and discipline punishment;2, often without reason not to participate in the activities of the staff representatives of the staff and the organization of the work of the organization, a serious dereliction of duty;3, because of unpaid leave, sick leave and long-term, full-time study and so on, not to participate in the activities of the post of the staff and workers congress;4, removed from the unit, from the original delegation.The rights of the representatives of the fif