毕业设计报告CAN总线接口电路制作设计报告资料.docVIP

  • 8
  • 0
  • 约3.23万字
  • 约 47页
  • 2016-12-20 发布于湖北
  • 举报

毕业设计报告CAN总线接口电路制作设计报告资料.doc

CAN总线接口电路制作设计报告 摘要:CAN总线是众多的现场总线标准之一,广泛应用于工业测控网络中。本文给出了基于CAN控制器82C250和 SJAl000的智能节点的硬件电路及软件结构,对设计中的难点及实现过程中应注意的问题进行了比较详细地介绍。 关键词:CAN ;SJA1000独立CAN器件;PCA82C250 CAN转换器 Design of CAN Bus system terminal circuit Abstract:CAN (Controller Area Network) ,one of the most famous field—bus protocol standard ,was used widely in measurement and control network in industry field. In this paper a hard circuit and soft configuration of the intelligent node based on CAN controller 82C250 and SJA1000 have been presented. Especially the crux in designing and the problems shoul

文档评论(0)

1亿VIP精品文档

相关文档