数控技术应用专业英语教学课件作者刘小芹2.Lathe课件.pptVIP

 English on Mechanical Engineering Lesson 2 Lathes Text The basic machines that are designed primarily to do turning, facing and boring are called lathe. In turning the workpiece, a cutter moves in the direction parallel to the axis of rotation of the workpiece or at the angle to the axis, cutting off the metal from the surface of the workpiece. The bed is the backbone of a lathe. Two sets of parallel, longitudinal ways, inner and outer, are contains on the bed, usually on the upper side. Some makers use an inverted V-shape for all four ways, where