数控技术应用专业英语教学课件作者刘小芹5.注射模设计课件.pptVIP

 English on Mechanical Engineering Lesson 5 Injection Mold Design Text The function of a mold is twofold: imparting the desired shape to the plasticied polymer and cooling the injection molded part. It is basically made up of two sets of components: the cavities and cores and the base in which the cavities and cores are mounted. Fig.1 shows typical layouts and description of parts in the mold, including the cavities and cores. The mold, which contains one or more cavities, consists of two basic parts: (1) a stationary molds half on the side where the plastic is