履带吊组装作业指导书.docVIP

CSPC NANHAI PETROCHEMICALS PROJECT CSPC 南 海 石 化 项 目 THE ASSEMBLY OF CC1000 CRAWLER CRANE CC1000履带吊组装作业指导书 WORKING INSTRUCTION: WI-8710-8100-2012 作业指导书：WI-8710-8100-2012 SEPCO Electric Power Construction Corporation 山东电力基本建设总公司 REV 版次 DATE 日期 REASON OF ISSUE 发布原因 BY 编制 CHK’D 审核 REVIEW 审查 APPR 批准 A 26NOV 03 ISSUED FOR REVIEW ZJ ZF ZX SDP B 02DEC 03 ISSUED FOR APPROVAL ZJ ZF ZX SDP 目 录 TABLE OF CONTENTS 1 PURPOSE目的 2 SCOPE范围 3 RESPONSIBILITIES职责 4 PROJECT SUMMARIZATION工程概述 WRITING REFERENCE编制依据 CONSTRUCTION PREPARATION施工准备 7 THE CONSTRUCTING MACHINES AND TOOLS 施工机械及工器具 8 ORGANISE LABOUR FORCE劳动力组织 CONSTRUCING PROCESS AND METHOD 施工工序和施工方法 THE PROTECTION MEASURE OF ENVIRONMENT境保护措施 11 JOB SAFETY ANALYSIS安全工作分析 PURPOSE目的 To provide the working instruction for the assembly of CC1000 crawler crane in CSPC Nanhai Petrochemicals Project, Steam Power Plant Project to ensure the project to complete on time and with good quality. 在于制订南海石化汽电联产项目的CC1000的组装的作业指导，确保工程高质量的按期完工。 SCOPE范围 This instruction complies to the assembly of CC1000 crawler crane in CSPC Nanhai Petrochemicals Project, Steam Power Plant Project 本指导书适用于南海石化汽电联产项目起重机械CC1000履带吊的组装。 3 RESPONSIBILITIES职责 3.1 SEPCO2 is responsible for the assembly and adjusting of CC1000 crawler crane. SEPCO2负责CC1000履带吊的组装与调试。 3.2 SEPCO is responsible for the interface coordination and acceptance. SEPCO 负责接口协调和质量验收。 4 PROJECT SUMMIRUZITION 工程概况 As the project needs, CC1000 will be transported from Yunhe project to Huizhou to lift the boiler steel structures. According to the requirement of the project, the working rate is 48m+36m. 因工程需要，CC1000由运河工地运至惠州工地，用于锅炉钢架的吊装，根据工程需要其作业工况为48m+36 m塔式工