基于Multisim11交通灯控制器设计解剖.docVIP

基于Multisim 11交通灯控制器设计 摘要：介绍运用Multisim 11 仿真软件，设计一个十字路口交通灯控制器。该控制器实现了对十字路口交通信号灯控制。利用Multisim 11 这种比较高效的设计平台，能够方便地设计电路，并且运用虚拟仪器库进行仿真以及验证电路是否达到设计要求。与传统的设计方法相比，他更具有省时、低成本、高效率的优越性。 关键词：Multisim 11；交通灯控制器；组合逻辑电路： Design Traffic Lights Controller at the Crossroads Based on Multisim 11 Abstract:A traffic lights controller at the crossroads was designed based on Multisim11 simulation software, and the traffic signal lights control at the crossroads was realized . It is easy to design the electric circuit bu using high efficient Multisim 11 design platform, make the simulation by virtual instrument libraries, and verify the electric ciecuit whether or not meet the design requirements. It has superiority of time saving, loe cost and efficient by comparing with the traditional design method. Keywords: Multisim 11; traffic controller; combinatorial logical circuit; 目 录 1.绪论····················································································1 2.交通信号灯控制电路的概述···············································1 3.单元模块。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。2 3.1电源模块·······································································2 3.2 秒脉冲发生模块···························································4 3.3 计数模块······································································5 3.4 逻辑电路模块······························································6 3.5 分频器模块··································································8 4. 数字电子钟电路的仿真与调试······································9 4.1 仿真软件的简介···························································9 4.2 交通信号灯控制电路的仿真·······································10 4.3 交通信号灯控制电路的实现·······································11 4.4 调试方法·····································································11 4.5 调试中出现的问题、原因分析及