本科毕业设计_三爪异型孔电火花加工工艺实验研究.docVIP

三爪异型孔电火花加工工艺实验研究 摘要：与传统的切削加工方法不同，电加工是利用工具电极和工件两极之间脉冲放电时产生的电腐蚀现象对工件进行尺寸加工的加工方法。本文在分析线切割、电火花成型加工基本原理和工艺特点的基础上,进行了三爪异型孔电火花加工工艺实验研究。采用慢走丝和螺纹孔连接的方式分别制备和安装电极；经过分析，选择合适的电参数加工出合格的零件。 要进一步说明 关键词：电火花；电极；电火花成型加工；线切割 The Technology Experimental Study of Three-jaw Profile Hole Electrosparking Abstract:It is different from tradition cutting process that electromachining is a processing method，which uses the electrocorrosion phenomenon which is produced by pulse discharge between tool electrode and both ends of the workpiece.The article was based on the basic principle and the process characteristics