CISCO_NAT配置命令.docVIP

CISCO NAT 配置命令21.1.在路由器上启用基本的NAT功能 Router#configure terminalEnter configuration commands, one per line. End with CNTL/Z.Router(config)#access-list 15 permit 55Router(config)#ip nat inside source list 15 interface FastEthernet0/0 overloadRouter(config)#interface FastEthernet0/2Router(config-if)#ip address Router(config-if)#ip nat insideRouter(config-if)#exitRouter(config)#interface FastEthernet0/1Router(config-if)#ip address Router(config-if)#ip nat insideRouter(config-if)#exitRouter(config)#interface Ethernet0/0Router(config-if)#ip address 52Router(config-if)#ip nat outsideR