《CM602中英文对照machinefunction.ppt

2.1.18 PCB POSITIONONG 2.1.19 Heat calibrate mark 2.1.20 Network configuration 2.1.21 Mount position 2.1.22 camera 2.1.23 Lighting intensity * Each of Us Acting with the Spirit of a Founder ideas for life * 按一下以編輯母片本文樣式 第二階層 第三階層 第四階層第五階層 * * Realizing Dreams Through Great Innovation P. * 2.1.1 Origin Offset XY Unit UX: X Axis 原点的修正值 UY: Y Axis 原点的修正值 Remarks: 通过 Machine Prmtr teach --〉 PCB recog camera x y axis originoffset 得到以上数据 Head Unit Z: Z Axis 原点的修正值 Theata: Theata Axis 原点的修正值 Remarks: 通过 Machine Prmtr teach --〉 Z axis origin offset 得到以上数据 Conveyor width: W: Width 原点的修正值 Remarks: 通过 Machine Prmtr teach --〉 W axis origin offset 得到以上数据 Evaluation only. Created with Aspose.Slides for .NET 3.5 Client Profile 5.2.0.0. Copyright 2004-2011 Aspose Pty Ltd. Evaluation only. Created with Aspose.Slides for .NET 3.5 Client Profile 5.2.0.0. Copyright 2004-2011 Aspose Pty Ltd. 2.1.2 Judgment Value Recognition (PCBChip) Acceptable recog rate [85]% Remarks: 一般默认为 85%, Value =85, recog is successful 当设定为 0% 时，可用于 Test Mode (No PCB) Bad Feeder Miss rate [20]% Remarks:当单站抛料率=20%，机器自动将 Feeder判为NG Tape feeder start Miss qty [10] Piece Remarks: 当单站连续出现10 次吸着不良时，Pickup Error Parts empty Miss qty [10] Piece Remarks: 当单站连续出现10 次吸着不良时，Part empty Bad nozzle Miss rate [20] % Error stop [8] nozzles Remarks: 当单个 nozzle 抛料率=20%，机器自动将 Nozzle判为NG ( 分 Recog NG / Pickup NG ) 当有 8 个Nozzle 被判为 NG 时，机器将自动停下，等待处理 Evaluation only. Created with Aspose.Slides for .NET 3.5 Client Profile 5.2.0.0. Copyright 2004-2011 Aspose Pty Ltd. 2.1.3 Option Configuration Evaluation only. Created with Aspose.Slides for .NET 3.5 Client Profile 5.2.0.0. Copyright 2004-2011 Aspose Pty Ltd. No. 1 2 3 4 5 6 7 8 Item PCB Auto-eject Pre Process other company M/C joint Parts empty info parts name display Supply head indicate Tray stock supply rotation mode(Only for the machine with tray) Tray stock auto ex