CAP Scanner Course slides第扫描课程幻灯片.ppt

Mission Aircrew CourseChapter 2: Aircraft Familiarization(May 2006) Aircrew Tasks O-2015 DEMONSTRATE GROUND OPERATIONS AND SAFETY (S) P-2016 IDENTIFY AND DISCUSS MAJOR AIRCRAFT CONTROLS (S) P-2017 IDENTIFY AND DISCUSS MAJOR AIRCRAFT INSTRUMENTS (S) P-2018 DISCUSS AIRCRAFT WEIGHT AND BALANCE (S) P-2019 IDENTIFY ITEMS CHECKED DURING AN AIRCRAFT PRE-FLIGHT INSPECTION (S) P-2020 DISCUSS THE DANGER OF WAKE TURBULENCE (S) P-2119 DEMONSTRATE HOW TO COMPLETE A CAP AIRCRAFT INSPECTION (P) Objectives State the basic function of the aircraft ailerons, elevator, rudder, trim tabs and fuel selector. {S; 2.1} Discuss the relationship between the magnetic compass and heading indicator. {S; 2.2.1 2.2.2} State the basic function of the airspeed indicator, attitude indicator, GPS, nav/comm radios, audio panel, and transponder. {S; 2.2.3 - 2.2.11} Discuss the consequences of exceeding the gross weight limit. {S; 2.3.1} Objectives (con’t) Discuss the importance of maintaining proper balance (c.g.), and factors in computing weight balance {S; 2.3.2} State the purpose of the pre-flight inspection, and discuss the items checked during the pre-flight inspection. {S; 2.4} Discuss ground operations and safety, including: {S; 2.5} Ramp safety Moving and loading an aircraft Entry and egress Fuel management Taxiing, including airport signs and markings Discuss wake turbulence, including where it is most likely to be encountered. {S; 2.6} Aircraft Familiarization Why do I need to know this stuff anyway? Structure Instrumentation Weight Balance Pre-flight inspection Safety Ground operations Wake turbulence Flightline signals The Airplane CAP typically uses C172 and C182. Basic components Ailerons provide roll control Elevators provide pitch control The rudder controls yaw Trim tabs neutralize control pressures Fuel selector Typical Instrument Panel Engine Quadrant Magnetic Compass Primary Doesn’t require any power Used to set HI (DG) Installation problems Bank angles and speed changes can ca