金线机维护资料.pptVIP

OPERATING SOFTWARE CHECKING Purpose: FLOPPY DISK DRIVE CLEANING Purpose: BONDHEAD CLEANING Purpose: CAPILLARY SCREW REPLACEMENT PROCEDURE Purpose: TRANSDUCER HORN 90 DEGREES ADJUSTMENT Purpose: Procedure: Power off the equipment, remove the camera assembly, mount the transducer 90 degrees adjustment tool on to the transducer, locate the dowel of the adjusting tool into the capillary position and tighten the capillary screw. Check the transducer adjustment tool remains square on the heater block. Loosen the capillary screw and remove the adjustment tool from the transducer horn. TRAN